ONKAPOX EPOXY PRODUCT GROUP

ONKAPOX GRN 785
GRAINED EPOXY TOP COAT

PRODUCT DESCRIPTION
ONKAPOX GRN 785, is a two-component, solvent-free, epoxy-based grained final epoxy top coat paint with grained appearance.

AREA OF USE
It can be used as a decorative floor coating in:

  • Chemical industry,
  •  Food and beverage industry
  • Automotive industry and aircraft maintenance hangars
  • Laboratories
  • Hospitals
  • Exhibition and fair halls
  • Textile industry and other industrial facilities where floor dusting affects the manufacturing process

ADVANTAGES

  • Easy application.
  • High mechanical and chemical resistance
  • High abrasion resistance
  • Not a fire hazard as it is solvent-free
  • Easy to clean, does not host any bacteria, dustproof and healthy.

TECHNICAL INFORMATION
ONKAPOX GRN 785 component A is a low-viscosity modified epoxy resin product. ONKAPOX GRN 785 component B is a modified cycloaliphatic polyamine hardener product. It is especially suitable for surfaces requiring high chemical and mechanical resistance as well as food production plants where complete hygiene is essential.

RESISTANCE
It is resistant to dilute acids, dilute and concentrated alkaline, cleaning detergents and disinfectants, plant-based, mineral and animal based oils, fresh water and sea water, diesel oil, oil, alcohol and many other solvents.

APPLICATION METHOD
Fresh concrete and cement plaster must be cured for at least 21 days before application.

Paint, dust, dirt and other similar loose particles on the mortar residue old concrete and cement plaster must be removed with diamond bit vacuums and sandblasting, scraping or brushing. All surface must be primed with ONKAPOX RESIN 360 primer.

After primer application, ONKAPOX SLF 116 base epoxy must be used for backing coat and putty applications. Components A and B of ONKAPOX GRN 785 grained epoxy top coat paint must be mixed in the Component A container with a low-viscosity mixer for at least 3 minutes before application. The application will be dry after 24 to 36 hours and complete ossification time is 1 week / 7 days.
– Surface and ambient temperature must be at least 10ºC.
– In and on surface humidity must be at least 5% CM
– Relative ambient humidity must be maximum 80%.
– Silicone vapors must not be present in the environment

CONSUMPTION
ONKAPOX GRN 785, can be used at different levels of consumption depending on the application thickness and floor properties. Theoretically, impermeable and flat surfaces requires approximately 1 m2/0.600kg (may change depending on the roughness of the surface) for each 1 mm film thickness in a single coat. Consumption may vary depending on the system to be chosen. You may contact the company representatives for further detailed information.

PACKAGING
As a two-component kit: total 20 kg
Component A : 17.50 kg
Component B : 2.50 kg

SHELF LIFE
Can be stored for 1 year in a dry, cool and protected place, in its original packaging

SAFETY

Work suits, protective goggles, masks and gloves for occupational health and safety must be used during application. Especially, as the hardening components are irritant, the components must be kept away from the eyes and the skin. In case of contact with the skin and the eyes, wash with plenty of water and soap. Do not clean with solvent. Consult
with a physician if ingested.

ONKAPOX GRN 785

PACKAGING


As a two-component kit: total 20 kg
Component A : 17.50 kg
Component B : 2.50 kg

SHELF LIFE


Can be stored for 1 year in a dry, cool and protected place, in its original packaging

ONKAPOX DRIVE 180
EPOXY PAINT TOP COAT

PRODUCT DESCRIPTION
ONKAPOX DRIVE 180, is a two-component, solvent-free, epoxy-based epoxy paint top coat.

AREA OF USE

It can be used as a decorative floor coating in:

  • Chemical industry,
  • Food and beverage industry
  • Automotive industry and aircraft maintenance hangars
  • Laboratories
  • Hospitals
  • Exhibition and fair halls
  • Textile industry and other industrial facilities where floor dusting affects the manufacturing process

ADVANTAGES

  • Easy application.
  • High mechanical and chemical resistance
  • High abrasion resistance
  • Not a fire hazard as it is solvent-free
  • Easy to clean, does not host any bacteria, dustproof and healthy.

TECHNICAL INFORMATION
ONKAPOX DRIVE 180 component A is a low-viscosity modified epoxy resin product. ONKAPOX DRIVE 180 component B is a modified cycloaliphatic polyamine hardener product. It is especially suitable for surfaces requiring high chemical and mechanical resistance as well as food production plants where complete hygiene is essential.

RESISTANCE
It is resistant to dilute acids, dilute and concentrated alkaline, cleaning detergents and disinfectants, plant-based, mineral and animal based oils, fresh water and sea water, diesel oil, oil, alcohol and many other solvents.

APPLICATION METHOD
Fresh concrete and cement plaster must be cured for at least 21 days before application. Paint, dust, dirt and other similar loose particles on the mortar residue old concrete and cement plaster must be removed with diamond bit vacuums and sandblasting, scraping or brushing. All surface must be primed with ONKAPOX PAINT PRIMER. After primer application, ONKAPOX DRIVE 180 base epoxy must be used for backing coat and putty applications. Components A and B of ONKAPOX DRIVE 180 epoxy paint must be mixed in the Component A container with a low-viscosity mixer for at least 3 minutes before application. The application will be dry after 24 to 36 hours and complete ossification time is 1 week / 7 days.
– Surface and ambient temperature must be at least 10ºC.
– In and on surface humidity must be at least 5% CM
– Relative ambient humidity must be maximum 80%.
– Silicone vapors must not be present in the environment

CONSUMPTION
ONKAPOX DRIVE 180, can be used at different levels of consumption depending on the application thickness and floor properties. Theoretically, impermeable and flat surfaces requires approximately 1 m2/0.600kg (may change depending on the roughness of the surface) for each 0.50-0.80 mm film thickness in a single coat. Consumption may vary depending on the system to be chosen. You may contact the company representatives for further detailed information.

PACKAGING
As a two-component kit: total 20 kg
Component A : 17.50 kg
Component B : 2.50 kg

SHELF LIFE
Can be stored for 1 year in a dry, cool and protected place, in its original packaging

SAFETY
Work suits, protective goggles, masks and gloves for occupational health and safety must be used during application. Especially, as the hardening components are irritant, the components must be kept away from the eyes and the skin. In case of contact with the skin and the eyes, wash with plenty of water and soap. Do not clean with solvent. Consult with a physician if ingested.

ONKAPOX DRIVE 180

PACKAGING


As a two-component kit: total 20 kg
Component A : 17.50 kg
Component B : 2.50 kg

SHELF LIFE


Can be stored for 1 year in a dry, cool and protected place, in its original packaging

PACKAGING


As a two-component kit: total 20 kg
Component A : 17.50 kg
Component B : 2.50 kg

SHELF LIFE


Can be stored for 1 year in a dry, cool and protected place, in its original packaging

ONKAPOX PAINT PRIMER
EPOXY PRIMER

DEFINITION
Epoxy and solvent based, clear varnish, protective and strengthening thin coating material prepared for concrete, alum and mosaic surfaces.

USE
It can be used as a protective finish on both indoor and outdoor concrete, alum, mosaic, tile surfaces over surface hardeners. It creates easy-to-clean, glossy surfaces that are resistant to dusting, chemical and mechanical impacts.

SPECIAL PROPERTIES

  • Resistant to dusting, does not collect dust
  • Two-component, easy use
  • Penetrates concrete
  • Increases strength against corrosion and impacts
  • Increases strength of concrete against chemical impacts

EFFICIENCY
Depends on the surface absorbing capacity. One coat efficiency of the product is 200 g/m2 on non-absorbent, strong surfaces. For permeable and poor surfaces, the efficiency is 300-400 g/m2 with multiple coats.

PACKAGING
In 2-component set: A 10 LT. plastic jerry can B 10 LT. plastic jerry can, total of 20 LT.

STORAGE
1 year in a cool, dry and protected environment, in its original packaging

APPLICATION
Surface must be clean, dry and free of dust and dirt. All loose particles must be removed from the surface and the surface must be mechanically wiped. 1 or 2 coats of clear ONKAPOX PAINT PRIMER must be applied on the whole surface.

ONKAPOX PAINT PRIMER

PACKAGING


In 2-component set: A 10 LT. plastic jerry can B 10 LT. plastic jerry can, total of 20 LT.

STORAGE


1 year in a cool, dry and protected environment, in its original packaging

ONKAPOX RESIN 360
SOLVENT-FREE EPOXY PRIMER

PRODUCT DEFINITION
ONKAPOX RESIN 360, is a two-component, solvent-free, epoxy based clear, low-viscosity primer.

AREA OF USE
ONKAPOX RESIN 360 can be used as a primer under epoxy and polyurethane based coatings. It can also be used as a repair mortar by mixing 1:2 – 1:4 with silica sand with various grain diameters. ONKAPOX RESIN 360 is primarily used for face walls, foundations, bridges, terrace insulations, strengthening ground concrete and as a primer under polyurethane insulation and coating systems.

PROPERTIES

  • Creates a strong, suitable primer under epoxy and polyurethane coatings.
  • Protects the adherence of the coating to be applied on itself, due to its resistance to moisture from the negative.
  • Penetrates well due to its low viscosity.
  • Has very good mechanical strength.

APPLICATION
Cured concrete surfaces must have a concrete quality of BS18 or minimum 350 dose and it must be minimum 3 weeks old. Foam layer on the surface must be removed with Blastrac or wiping machines, dust layer must be removed with industrial vacuums and the floor must be free of dirt and oils. Tensile strength of the floor concrete must be minimum 1.5N/mm2 and humidity must be maximum +6 ºC.

APPLICATION METHOD
First, Component A must be mixed well for 1-2 minutes with a low-speed mechanical mixer (300-400 rpm). Then Component B must be added and mixed well. The resulting homogeneous mixture will be applied on the floor with a roll brush or a level comb. If epoxy or polyurethane coating will be made on the moisture barrier, silica sand (0,8-1 kg/m2) with grain diameter of 0,1-0,3 mm or 0,3-0,8 mm depending on the system, while the ONKAPOX RESIN 360 is still wet.

CHEMICAL RESISTANCE
ONKAPOX RESIN 360 is resistant against dilute acids, lye, saline solutions, mineral oils and many other chemicals. You can ask our technical department for a chemical resistance chart if necessary.

PACKAGING
As a two-component kit: total 12 kg
Component A : 8.00 kg
Component B : 4.00 kg

CONSUMPTION
0,200-0,400 kg/m2, depending on the quality of the concrete.

SHELF LIFE
Can be stored for 18 months in a dry and cool place, in its original unopened packaging.

SAFETY MEASURES
Components must not contact with the skin or the eyes or the foods, due to their irritant properties. Any areas of contact with the material must be washed with plenty of water and soap and a physician must be consulted in serious cases. Gloves must be worn during application. Do not approach the working site with fire.

ONKAPOX RESIN 360

PACKAGING


As a two-component kit: total 12 kg
Component A : 8.00 kg
Component B : 4.00 kg

CONSUMPTION


0,200-0,400 kg/m2, depending on the quality of the concrete.

SHELF LIFE


Can be stored for 18 months in a dry and cool place, in its original unopened packaging.

ONKAPOX SLF 116
SELF LEVELLING EPOXY TOP COAT

PRODUCT DESCRIPTION
ONKAPOX SLF 116 is a two-component, solvent-free, epoxy- based self levelling glossy final epoxy top coat.
AREA OF USE
It can be used as a decorative floor coating in:

  • Chemical industry,
  • Food and beverage industry
  • Automotive industry and aircraft maintenance hangars
  • Laboratories
  • Hospitals
  • Exhibition and fair halls
  • Textile industry and other industrial facilities where floor dusting affects the manufacturing process

ADVANTAGES

  • Easy application.
  • High mechanical and chemical resistance
  • High abrasion resistance
  • Not a fire hazard as it is solvent-free
  • Easy to clean, does not host any bacteria, dustproof and healthy.

TECHNICAL INFORMATION
ONKAPOX SLF 116 component A is a low-viscosity modified epoxy resin product. ONKAPOX SLF 116 component B is a modified cycloaliphatic polyamine hardener product. It is especially suitable for surfaces requiring high chemical and mechanical resistance as well as food production plants where complete hygiene is essential.

RESISTANCE
It is resistant to dilute acids, dilute and concentrated alkaline, cleaning detergents and disinfectants, plant-based, mineral and animal based oils, fresh water and sea water, diesel oil, oil, alcohol and many other solvents.

APPLICATION METHOD
Fresh concrete and cement plaster must be cured for at least 21 days before application. Paint, dust, dirt and other similar loose particles on the mortar residue old concrete and cement plaster must be removed with diamond bit vacuums and sandblasting, scraping or brushing. All surface must be primed with ONKAPOX RESIN 360 primer. After primer application, ONKAPOX SLF 116 base epoxy must be used for backing coat and putty applications. Components A and B of ONKAPOX SLF 116 Self Levelling epoxy must be mixed in the Component A container with a low-viscosity mixer for at least 3 minutes before application. The application will be dry after 24 to 36 hours and complete ossification time is 1 week / 7 days.
– Surface and ambient temperature must be at least 10ºC.
– In and on surface humidity must be at least 5% CM
– Relative ambient humidity must be maximum 80%.
– Silicone vapors must not be present in the environment

CONSUMPTION
ONKAPOX SLF 116, can be used at different levels of consumption depending on the application thickness and floor properties. Theoretically, impermeable and flat surfaces requires approximately 1 m2/3kg (may change depending on the roughness of the surface) for each 2 mm film thickness in a single coat. Consumption may vary depending on the system to be chosen. You may contact the company representatives for further detailed information.

PACKAGING
As a two-component kit: total 16.5 kg
Component A : 13.50 kg
Component B : 3.00 kg

SHELF LIFE
Can be stored for 1 year in a dry, cool and protected place, in its original packaging

SAFETY
Work suits, protective goggles, masks and gloves for occupational health and safety must be used during application. Especially, as the hardening components are irritant, the components must be kept away from the eyes and the skin. In case of contact with the skin and the eyes, wash with plenty of water and soap. Do not clean with solvent. Consult with a physician if ingested.

ONKAPOX SLF 116

PACKAGING


As a two-component kit: total 16.5 kg
Component A : 13.50 kg
Component B : 3.00 kg

SHELF LIFE


Can be stored for 1 year in a dry, cool and protected place, in its original packaging

ONKAPOX VARNISH
CLEAR EPOXY VARNISH

DEFINITION
Epoxy and solvent based, clear varnish, protective and strengthening thin coating material prepared for concrete, alum and mosaic surfaces.

USE
It can be used as a protective finish on both indoor and outdoor concrete, alum, mosaic, tile surfaces over surface hardeners. It creates easy-to-clean, glossy surfaces that are resistant to dusting, chemical and mechanical impacts.

SPECIAL PROPERTIES

  • Resistant to dusting, does not collect dust
  • Two-component, easy use
  • Penetrates concrete
  • Increases strength against corrosion and impacts
  • Increases strength of concrete against chemical impacts

EFFICIENCY
Depends on the surface absorbing capacity. One coat efficiency of the product is 200 g/m2 on non-absorbent, strong surfaces. For permeable and poor surfaces, the efficiency is 300-400 g/m2 with multiple coats.

PACKAGING
In 2-component set: A 10 LT. plastic jerry can B 10 LT. plastic jerry can, total of 20 LT.

STORAGE
1 year in a cool, dry and protected environment, in its original packaging

APPLICATION
Surface must be clean, dry and free of dust and dirt. All loose particles must be removed from the surface and the surface must be mechanically wiped. 1 or 2 coats of clear ONKAPOX VARNISH must be applied on the whole surface.

ONKAPOX VARNISH

PACKAGING


In 2-component set: A 10 LT. plastic jerry can B 10 LT. plastic jerry can, total of 20 LT.

STORAGE


1 year in a cool, dry and protected environment, in its original packaging

PACKAGING


In 2-component set: A 10 LT. plastic jerry can B 10 LT. plastic jerry can, total of 20 LT.

STORAGE


1 year in a cool, dry and protected environment, in its original packaging

ONKAPOX WET 365
SOLVENT FREE EPOXY MOISTURE BARRIER

PRODUCT DEFINITION
ONKAPOX WET 365 is a two-component, solvent-free, epoxy based moisture barrier.

AREA OF USE
ONKAPOX WET 365, the two-component, water-based Epoxy treatment and impregnation primer. Does not contain any fillers or pigments. Penetrates to capillary pores due to its low viscosity. Perfectly diffuses to fresh concrete. Effective against negative pressure. Dries fast. Does not contain any volatile organic compounds. Easily applied with rolls or brushes.

PROPERTIES

  • Creates a strong, suitable primer under epoxy and polyurethane coatings.
  • Protects the adherence of the coating to be applied on itself, due to its resistance to moisture from the negative.
  • Penetrates well due to its low viscosity.
  • Has very good mechanical strength.

APPLICATION
Cured concrete surfaces must have a concrete quality of BS18 or minimum 350 dose and it must be minimum 3 weeks old. Foam layer on the surface must be removed with Blastrac or wiping machines, dust layer must be removed with industrial vacuums and the floor must be free of dirt and oils. Tensile strength of the floor concrete must be minimum 1.5N/mm2 and humidity must be maximum +6 ºC.

APPLICATION METHOD
First, Component A must be mixed well for 1-2 minutes with a low-speed mechanical mixer. Then Component B must be added and mixed well. The resulting homogeneous mixture will be applied on the floor with a roll brush or a level comb. If epoxy or polyurethane coating will be made on the moisture barrier, silica sand (0,8-1 kg/m2) with grain diameter of 0,1-0,3 mm. or 0,3-0,8 mm depending on the system, while the ONKAPOX WET 365 is still wet.

CHEMICAL RESISTANCE
ONKAPOX WET 365 is resistant against dilute acids, lye, saline solutions, mineral oils and many other chemicals. You can ask our technical department for a chemical resistance chart if necessary.

PACKAGING
As a two-component kit: total 12 kg
Component A : 8.00 kg
Component B : 4.00 kg

CONSUMPTION
0,200-0,400 kg/m2, depending on the quality of the concrete.

SHELF LIFE
Can be stored for 18 months in a dry and cool place, in its original unopened packaging.

SAFETY MEASURES
Components must not contact with the skin or the eyes or the foods, due to their irritant properties. Any areas of contact with the material must be washed with plenty of water and soap and a physician must be consulted in serious cases. Gloves must be worn during application. Do not approach the working site with fire.

ONKAPOX WET 365

PACKAGING


As a two-component kit: total 12 kg
Component A : 8.00 kg
Component B : 4.00 kg

CONSUMPTION


0,200-0,400 kg/m2, depending on the quality of the concrete.

SHELF LIFE


Can be stored for 18 months in a dry and cool place, in its original unopened packaging.